Elite Reader Delta Card Not Booting Correctly

Elite Reader's Delta Cards usually take 1 to 2 minutes to fully boot. Once booted the PWR light will stay solid red and the CPU light will flash red once per second. If the lights all stay solid or get stuck and don't act fully booted there could be an issue with the CF Card, SAM 255, AAA batteries, or the Delta Card. Below are troubleshooting steps to assist in getting the Delta Card to boot fully.

1. Press Delta Card's Reset Button

• Note: Proceed to Step 2 if Elite Reader doesn't boot

2. Toggle Power Switch Off
3. Remove Delta Card from Elite Reader
4. Reseat AAA batteries
5. Place Delta Card into Elite Reader
6. Toggle Power Switch On

• Note: Proceed to Step 7 if Elite Reader doesn't boot

7. Remove Delta Card from Elite Reader
8. Reseat CF Card
9. Place Delta Card into Elite Reader
10. Toggle Power Switch On

• Note: Proceed to Step 11 if Elite Reader doesn't boot

11. Remove Delta Card from Elite Reader
12. Reseat SAM 255
13. Place Delta Card into Elite Reader
14. Toggle Power Switch On

• Note: Proceed to Step 15 if Elite Reader doesn't boot

15. Toggle Power Switch Off
16. Remove Delta Card from Elite Reader
17. Replace AAA batteries
18. Place Delta Card into Elite Reader
19. Toggle Power Switch On

• Note: Proceed to Step 20 if Elite Reader doesn't boot

20. Remove Delta Card from Elite Reader
21. Replace CF Card
22. Place Delta Card into Elite Reader
23. Toggle Power Switch On

• Note: Proceed to Step 24 if Elite Reader doesn't boot

24. Remove Delta Card from Elite Reader
25. Replace SAM 255
26. Place Delta Card into Elite Reader
27. Toggle Power Switch On

• Note: New Delta Card required if Elite Reader doesn't boot