Initial Setup
- Open Meet Manager and go to Run
- Select Interfaces > Setup > Track Button Timer
- Note: For Cross Country go to CC/RR > Interfaces > Setup
- Select Time Tech Sprint 8 and click OK
- Select Interfaces > Track Button Timer - Time Machine> Open/Close Serial Port
- Note: For Cross Country go to CC/RR > Interfaces > CC/RR Button Timer - Time Machine > Open/Close Serial Port
- In Track Button Finish Timer (0-16): field enter correct Port Number and click OK
- Note: For Cross Country enter Port Number in CC/RR Button Timer(0-16) field
- Note: See Open the Correct Port (Timing Console Interface) to select correct Port Number
Importing Results from Time Machine into Meet Manager for Track Events
- Open Meet Manager and go to Run
- Select event and heat
- Click Get Times: F3. A list of result files will appear, select correct file
- Open Meet Manager and go to Run
- In the Run the Meet screen go to CC/RR
- In the Cross Country / Road Race Module select Download
- Click Start Download and on the Time Machine press SetUp until RS232 PORT is displayed on screen
- On the Time Machine press SetUP until RE-XMIT shows and press Enter
- Note: Be sure HANDSHAKE LINE is off in the Time Machine
- Once file is downloaded go to Times menu
- In Times menu select Read Times and select the correct .tm2 file
