[Print]

Connecting a Reader to Dashboard

Document Details

Article Number 000031786
Article Type Article}
Article Link https://support.activenetwork.com/ipico/articles/en_US/Article/Connecting-a-Reader-to-Dashboard

Content Details

An IPICO reader may connect to Dashboard to set times, enable onboard logging, verify the reader is taking reads, and much more. Below are instructions on how to connect a reader to Dashboard.

1. Turn reader power on
2. Connect Ethernet cable between reader and computer
3. Ensure computer IP address is set to same address range as that of reader
Note: For information on assigning a static IP to your computer, please read Assign Static IP Address to Computer.
4. Open Dashboard
Note: For information on installing Dashboard, please read Install Dashboard.
5. Type reader IP address into address box
6. Click Connect