Use this guide to properly apply disposable tags to your race bibs.

Note: Document contains pictures to supplement instructions

1. Flip disposable tag so backside is facing upward - locate corner with a cut in backing paper
2. Fold cut corner forward and peel backing paper off corner
3. Peel remaining backing paper from body of disposable tag
4. Turn disposable tag over so sticky side is down and center over backside of a race bib
5. Gently press tag onto race bib beginning with center and smoothing outward
Note: Apply a solid even pressure along full perimeter
Note: Do not pull adhesive or copper wire from back of bib

Bib Tag Application Guide