Learn how to upgrade the USB (VDrive2) firmware for your IPICO Lite Reader.

Instructions:
  1. Ensure reader power is OFF
  2. Locate USB folder
  3. Insert thumb drive into computer
    • NOTE: Ensure that there are no other files on the thumb drive when you do this. 
  4. Copy FTRFB.FTD file from USB folder to thumb drive
  5. Eject and remove thumb drive from computer
  6. Insert thumb drive into reader
  7. Turn reader power ON
  8. Wait for two short beeps from reader
  9. Press and hold Trigger button for four beeps
  10. Remove thumb drive from reader
    • NOTE: Be sure to delete the FTRFB.FTD file from the thumb drive before using it for a race.